100% Quality Tested EN 10025-4 S355ML Steel Plates
- EN 10025-4 S355ML Steel Plates available for sale in thickness: 6MM to 300MM, width: 1500mm to 4050mm, and length: 3000mm to 15000mm
If you are interested in purchasing EN 10025-4 S355ML steel plates, or have any queries, please feel free to email us on email@example.com or call us on +919892451458
Metline is a specialized supplier of EN 10025-4 S355ML steel sheets and plates. We can offer EN 10025-4 S355ML pressure vessel steel plates in a variety of thickness and sizes at reasonable prices. EN 10025-4 S355ML is either available as ex–stock or directly shipped from the mill to our customers across the globe.
EN 10025-4 is a requirements for long products and hot-rolled flat products from weldable fine grain structural steels in state after normalization or normalization rolling, thickness <= 250 mm for steel grades S275, S355 and S420 and thickness <= 200 mm for steel grade S460 . The given steels are intended for particularly loaded elements of welded structures such as bridges, lock gates, storage tanks, water tanks etc., used at ambient temperature and in low temperatures. Structural steels must be referenced using standard symbols including but not limited to: M, ML.
Chemical Composition of EN 10025-4 S355ML Steel Plate
|Grade||The Element Max (%)|
Mechanical Properties of EN 10025-4 S355ML Steel Plate
|Grade||Thickness||Yield Strength||Tensile Strength||Elongation||Impact Energy|
|(mm)||MPa (min)||MPa||% (min)||(KV J) (min)|
|16> to ≤40||345||470-630||22||27|
|40> to ≤63||355||450-610||22||27|
|63> to ≤80||325||440-600||22||27|
|80> to ≤100||325||440-600||22||27|
|100> to ≤120||320||430-590||22||27|